LEARN

The New Tramex Concrete Moisture Encounter X5 - CMEX5

The Tramex Concrete Moisture Encounter X5 (CMEX5) is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.

Tramex Concrete Moisture Meters provide Quantitative %MC Readings

Andrew Rynhart, Tramex CTO, explains how the most reliable way to measure % moisture content is by way of the gravimetric method and that the Tramex quantitative concrete moisture meters are calibrated using gravimetric testing as a baseline to provide accurate % moisture content readings required by flooring manufacturers

How long does a concrete slab take to dry?

How long does concrete take to dry?

For concrete and cementitious screeds to receive a floorcovering we know that the base must be suitably “dry enough”. This is to prevent damage to the flooring material and to ensure a proper bond with adhesives. This is to prevent damage to the flooring material and to ensure a proper bond with adhesives. So, what is “dry enough” and how long does it take for concrete to reach this goal?

Are we paying enough attention to the procedure for F2170?

The Importance of Doing the Concrete RH Test Correctly

The F2170 procedure for RH testing of concrete floor slabs states that we should - Insert the hole liner to the bottom of the hole. Cap or seal the open end of the hole liner and any open gaps at the top of the liner per manufacturer’s instructions. Allow 24 hours to achieve moisture equilibrium within the hole before making relative humidity measurements.

How to perform a non-destructive flat roof moisture survey to ASTM D7954

How to perform a non-destructive flat roof moisture survey to ASTM D7954

Obtaining as much information about the roof as possible in advance is invaluable. A set of roof drawings or plans make moisture mapping much easier and a knowledge of the construction will make the job of calibration much faster.

Working with the Dec Scanner

Working with the Dec Scanner

The Dec Scanner is by far the simplest device to use for moisture testing and leak detection of a flat roof, however even a small amount of training can help new users to avoid simple pitfalls.